KD3002-DF10A printheads rev.a 1/4 compact high speed thick film thermal printhead (12 dots / mm) KD3002-DF10A using its expertise in lsi technology, rohm has developed new high density driver chips for use in the kd3002-d f10a . capable of being employed for both thermal and thermal transf er printing, with a print speed of 200mm/s, the resulting print heads are the fastest in their class. the high-speed and high-density printing answers the needs of atm, kios k and ticket printing devices, which are increasingly being called upon to produce graphical outpu t. z applications label printers ticket printers terminal printers z features 1) the use of a special partial glaze and the latest heating elem ent structure, along with new high-density driver chips that can accept big current, has allowed rohm to achieve print s peeds of 200mm/s with using thermal history control, the fastest in its class. 2) one rank resistance value of 1000 ? 3% eliminates the inconvenience of rank selection. 3) the required driving voltage of 3.15 to 5.25v allows wide range of power supply voltage setting. t his also allows multiple choice of electronic components for printers. 4) 2-inch, 3-inch, 4-inch and 8-inch series are available. z dimensions (unit : mm) 65 54.208 (effective print width) 55 0.2 2-m3 (effective depth 3) 5 0.2 5.1 0.1 (10.2) dot #640 2.6 0.1 max. 20 dot #1 connector b connector a no. 15 no. 1 no. 1 no. 15 5.1 0.4 4 0.2 20.0 downloaded from: http:///
KD3002-DF10A printheads rev.a 2/4 z equivalent circuit vh gnd vdd stb4stb3 di2 tmtm vh dot #640 dot #1 latch register shift register shift register thermistor30k ? b:3950 connector b connector a gndstb1 stb2 lat do1di1 clk fig.1 do2 vsf 1 2 3 4 5 stb no. 1 1 256 257 384 385 512 513 640 23 4 dots / stb 256128 128 128 dot no. di no. 1 1 384 385 640 2 dots / stb 384256 dot no. l/s downloaded from: http:///
KD3002-DF10A printheads rev.a 3/4 z pin assignments no. 1v h vhvh vh di1 do1 clk stb1stb2 gndgnd gnd gnd gnd 23 4 5 6 7 8 9 1011 12 13 14 15 circuit lat connector a connector b no. 1 gnd gndgnd gnd stb3stb4 v dd tm di2 vsf vhvh vh 23 4 5 6 7 8 9 1011 12 13 14 15 circuit do2 tm z timing chart clock (clk)data in (di) data out (do) latch (lat) "high":hold "low" :through "high":black"low" :white "high":black"low" :white strobe (stb) driver out tw clk t setup di t hold di td do t setup lat tw lat t setup stb tdo tdo t hold lat fig.2 downloaded from: http:///
KD3002-DF10A printheads rev.a 4/4 z characteristics effective printing widthdot pitch total dot number average resistance value applied voltage applied power print cycle pulse width maximum number of dots energized simultaneously maximum clock frequency maximum roller diameter running life / pulse life operating temperature parameter rave v h p o slt t on 54.2080.0847 640 1000 24 0.530.82 0.25 640 16 18.0 50/5 10 7 5 to 45 mmmm dots ? v w/dot msms dots mhz mm km/pulses c symbol typical unit z electrical characteristic curves paper : kf50-hda (oji) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 012345 scanning line time ( ms/line) energy ( mj/dot) fig.3 adaptive speed chart 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.00 0.05 0.10 0.15 0.20 0.25 0.30 energy ( mj/dot) optical density slt : 0.82ms/line fig.4 representative density curve 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 012345 scanning line time ( ms/line) energy ( mj/dot) fig.5 maximum energy curve 0 20 40 60 80 100 120 140 160 180 20 10 10 30 50 70 02 04 06 0 temperature : ( c) resistance : (k ? ) fig.6 thermistor curve downloaded from: http:///
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / eupope / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2007 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21, saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix downloaded from: http:///
|
